Showing posts with label vermont artist. Show all posts
Showing posts with label vermont artist. Show all posts

Saturday, May 18, 2019

Three Versions of My New Waltham Windsor Chairs

My Waltham line of chairs is made up of an arm chair, side chair and benches. These are all finished in milk paint and have some traditional detailing. They are designed to have a traditional look but with a comfortable fit of a modern chair. They have a deeper seat and my trademark "Floating Back" design that gives with the sitter.

The New Waltham chairs are the same chairs but with a more modern look.  They have a natural finish and most are made of cherry and ash.

My New Waltham Side Chairs are designed to be a chair with ample room and comfort.  The seat is round and inviting and it easy to move around in. You can sit straight or turn easily to accommodate changes in position or for entry and exit from the table.

windsor chair, Vermont, cherry and ash, modern windsor chair 

Below is a shot of the New Waltham Side Chair with a New Waltham Arm Chair. Notice that the arm chairs arm rail passes behind the back spindles. This is my trademark "Floating Back Design" that allows the back to flex with the sitter. It is much more comfortable than a traditional Windsor that does not allow for this movement.

windsor chair, arm chair, modern windsor chair, Vermont, Timothy clark

Below are two New Waltham Arm Chairs and a Tall New Waltham Arm Chair (center). Most of my customers order the standard New Waltham Arm Chair but occasionally individuals order the Tall version for the ends of the table or for a stand-alone chair.

All of my chair designs can be found at http://www.timothyclark.com/chairs.html
Please take a look and contact me to discuss the right chair for you.

Enjoy the Spring weather,

Tim





Saturday, April 26, 2014

The Work Schedule- It is not Amazon.

I am finding myself a bit behind at the moment.  A bunch of new orders came in at the end of last summer and fall.
Here are a few shots showing the leaf edge that mates to the end of my Trestle Table w/leaves.  I use an antique molding plane to make the concave edge.  This is just another example of details that cannot be made by pushing wood over a power tool. The extension portion of this table has set my schedule back a bit so I want to apologize if this has caused any inconvenience to my other clients who are waiting for their work.

There do not seem to be many businesses like mine these days.  One person, just getting work done as it comes. At times, I am right on schedule but other times a job takes longer than expected and I do understand that that can be frustrating.  Today we (myself included) expect to a quick response from those we contact or place orders with.  
I have learned though that those who work on their own live with a different time structure.

I just contacted a sawer about buying a live edge slab of walnut and I did not hear back for about a week.  I almost completely forgot that I had contacted him when I did eventually get an answer.

I have one supplier of sand paper who I have never spoken to.  I have worked with them for the last 16 years or so.  I used to leave a phone message (they never answered) and a week or so later I would get my stuff.  It always made me nervous since they never acknowledged that they had received my order until I got it.  Now, I order by email but the same rule applies. No response.  Sometimes they email to say that it has shipped.  Sometimes not. The trust factor is interesting and satisfying that it works.  This supplier has been a welcome mystery in my life.

.

So, this is what I have next on the schedule.

Currently shaping seats-   8 New Waltham arm chairs for the state of Washington

Just glued up seats for -  

1- New Waltham side chair rocker for California
                                      
1- Custom desk Chair for Nova Scotia
                                      
2- Cod Rib Rockers- one for Washington state and one for Germany

Then a Cod Rib Arm Chair for MA, 4 New Waltham Side Chairs for NJ, a dining table for MA,  2 Waltham Rockers for RI, and a Low Post Bed for ME.

The finished concave surface.
A bit to my chagrin, these latest posts about this table have netted some interest.  I have recently received three inquiries about this Trestle Table.  Hopefully, I will move a little faster on the these next tables since it is fresh in my mind.  Orders seem to come in bunches.  I did a few beds last fall, then it was benches, then a gaggle of chairs and now the tables are having their turn.

Raining today.  A good day to grind out chair seats.

Tim

Saturday, April 19, 2014

My Brother the Artist: Steve Clark

My Brother Steve has worked as an architect for the past 30 years or so but long before that he was a very skilled artist.  For some reason he has the ability to draw what he sees or imagines. I am very envious of that skill as drawing does not come easy for me.  Don't tell him I said that.  I am the little brother and competition is rooted deep from our younger days. 

These few samples of his work are all about sailboats but he does a lot of landscapes, and other topics, many of which include buildings.  Barns of the Vermont countryside are one of his favored topics.
The fleet of catboats below is my favorite of this bunch.  All of the paintings below were recently sold but if you like what you see, he can do something similar.  Also, feel free to send him an image of your boat and he can bring that to life.



He is updating his website you can see other examples of his paintings at his old site here http://stclarkdesigns.com/paintings2.htm
The email on that site is out of date but if you are interested in his work, you can email him here.
sclark100@comcast.net
Of course, don't order too much work from him or he won't be able to help me in the shop as he has been doing lately to help with my backlog of work.

Happy Easter,
Tim